15.00

Logic Clean SF is an self-acting cleaner of heavy dirt without intensive manual work The product is bio-based and does not harm the surface. However with sensitive areas the product must first be tested to determine the dilution. Logic Clean SF can be applied to concrete, stone types, wood and porcelain etc.

Logic Clean SF is an independent cleaner of heavy dirt without intensive manual work. The product is bio-based and does not harm the surface. However with sensitive areas the product must first be tested to determine the dilution. Logic Clean SF can be applied to concrete, stone types, wood and porcelain etc.

Application:
Before applying Logic Clean SF must be diluted with a ratio of 1 liter Logic Clean SF with 1-3 liters of water. The mixture can then be applied with by spray or brush. After the mixture has been applied, the surface should be rinsed with water after 15-30 minutes. If it concerns stubborn dirt, it is recommended to apply Logic Clean SF undiluted and/or use a pressure water machine. An exposure time of 15-30 minutes must be observed. If some spots do not release dirt by themselves they can be post-scrubbed with a scrubber or sponge.

Safety instructions:
When applying the product it is recommended to wear rubber protective gloves and protective glasses. If you use Logic Clean SF on footpaths and facades it is advisable to wear rubber boots. In case of skincontact immediately rinse with water. In case of eyecontact rinse with plenty of water, consult a doctor and take the bottle label with you. Immediately remove clothing that has come into contact with Logic Clean SF and rinse it with water.

Before
After
Animation

Video

There are no reviews yet.

Be the first to review “Logic Clean SF”

Your email address will not be published. Required fields are marked *